A single girder EOT crane in India is the way to lift things in workshops, warehouses and mid-size factories. It moves things easily takes up less space above and is much cheaper, than bigger crane options. This guide shows how it works, where it is used what makes it expensive and how to pick the company that makes it.
EOT means Electric Overhead Travelling crane. A single-girder overhead crane has a main beam that stretches across the bay. An electric hoist moves, along the side of this beam. The beam sits on two end carriages that move on rails attached to the building columns or gantry.
The crane can move in three ways: the hoist lifts the trolley moves across the span. The whole bridge moves along the length of the shed. A single operator can control all of this from a pendant or remote.
The system has four parts:
Girder: the main beam, usually a box girder or rolled steel joist.
End carriages: wheel assemblies that carry the girder along the runway.
Trolley: an electric wire rope hoist or chain hoist that lifts and traverses.
Control Pendant: the electrics that control speed, direction and safety limits.
Modern cranes use speed drives, for smooth starts and stops. This reduces load swing. Extends component life.
Choose the type based on your plant layout and duty.
Top-running crane: the girder rides on top of the runway rails. You may find the running crane best if you need the highest lifting height and the top-running crane is the most common choice.
Under- crane: the girder hangs from the roof structure. The slung crane fits low‑headroom buildings.
Wire rope hoist crane: the wire rope hoist crane works for higher capacity and longer duty cycles.
Chain hoist crane: the chain hoist crane is suitable for loads and compact workshops.
Pendant or remote operated crane: a pendant crane keeps the operator near the load while a radio‑remote crane gives a distance for the operator.
Crane: the HOT crane is a hand‑operated variant, for low‑use areas where electric power is limited.
Explore the full range on our EOT / HOT crane page.
| Parameter | Typical Range |
|---|---|
| Capacity | 1 to 15 tonnes |
| Span | 3 to 22 metres |
| Duty class | Light to heavy duty (Class II, III) |
| Control | Pendant, remote or cabin |
| Power supply | 415 V, 3 phase, 50 Hz |
Always confirm the exact EOT crane capacity, span, lifting height and duty class with your manufacturer before ordering.
| Feature | Single Girder | Double Girder |
|---|---|---|
| Capacity | Light to medium | Medium to very heavy |
| Headroom needed | Lower | Higher |
| Building load | Lighter | Heavier |
| Cost | Lower | Higher |
| Installation | Faster | More complex |
If your loads are below roughly 15 tonnes and your duty is moderate, a single girder crane is usually the smarter investment. For heavier or continuous duty, see our double girder EOT crane.
A single girder EOT crane in India is widely used across:
Typical jobs include loading machines, moving steel plates, positioning dies, handling pipes and feeding production lines.
There is no fixed single girder crane price, because every crane is built to a specification. These factors decide the final quotation:
Share your capacity, span, height and shed layout with the manufacturer to get an accurate quote. A well-specified crane saves money over its lifetime.
Here is the checklist you should use before you make a purchase:
Indian cranes are designed to Bureau of Indian Standards norms such as IS 807 (design of cranes), IS 3177 (code of practice for EOT cranes) and IS 3938 (electric wire rope hoists). You can read about standards at the Bureau of Indian Standards. Workplace lifting rules also fall under the Factories Act, and guidance is available from DGFASLI.
Good safety practice includes:
An annual health check or AMC keeps downtime low and the crane compliant.
Demand for a single girder EOT crane in India is strongest in industrial hubs. Arvex supplies and supports cranes in Ahmedabad, Vadodara, Surat, Rajkot, Bhavnagar, Gandhidham, Mundra, Mumbai, Delhi, Noida, Jaipur, Bhopal, Kolkata and Varanasi. Whether you are in a Gujarat GIDC estate or a North India factory cluster, we handle transport, installation and commissioning.
Looking for a trusted single girder EOT crane manufacturer in Ahmedabad? Arvex Cranes designs and builds cranes in-house at our Bakrol, Ahmedabad facility.
As a single girder EOT crane manufacturer in Ahmedabad, we also supply Goliath cranes, Jib cranes, electric chain pulley blocks, electric wire rope hoists, crabs, end carriages and crane electric panels.
Contact: +91 7048667796 | info@arvexcranes.com
Address: D/90, Phase-2, Swarnim Industrial Park, Bakrol-Dhamatvan Road, Bakrol, Ahmedabad – 382430
A single girder EOT crane in India gives you strong lifting performance at a lower cost, with easy installation and simple maintenance. Match the crane to your load, span and duty, and choose a manufacturer that tests, installs and supports what it sells.
Ready to upgrade your material handling? Call +91 7048667796 or email info@arvexcranes.com for a free quote from Arvex Cranes. Visit the Arvex Cranes to explore the full range.
A single girder EOT crane in India is the way to lift things in workshops,…