Arvex Cranes manufactures Goliath cranes (gantry cranes) for steel yards, fabrication areas, stockyards and open work sites. Two sturdy legs run on ground rails, so you can lift and move heavy loads outdoors without needing a building structure. Load tested before dispatch and supported across India.
Rail clamps or anchoring devices hold the crane firmly on its ground rails when it is parked or when strong wind blows, so the gantry stays stable in open yards and outdoor conditions.
Stoppers and buffers at the ends of the ground rails prevent the crane from running off track. A hooter or warning light alerts workers and vehicles in the yard while the crane is moving.
A cabin or remote control gives the operator a clear view of the load and yard. An overload limiter stops lifting beyond the rated load, limit switches control the hook position, and an emergency stop cuts power instantly during any hazard.
Goliath cranes load, unload and stack steel plates, pipes, coils, structural sections and scrap in open yards, moving along ground rails across the full storage area.
Used to lift and place precast slabs, beams, girders, shuttering and heavy construction material at casting yards, bridge and metro project sites, and open work areas.
Handles large fabricated structures, machinery and containers in outdoor fabrication areas, ports, shipyards, rail sidings and truck loading zones where overhead building rails are not available.
Our engineers check your yard layout, soil and foundation condition, ground rail level, rail gauge and power supply point. The rail bed is prepared and aligned accurately, since the crane’s smooth and safe travel depends on it.
The two legs are positioned on the ground rails and the girder is lifted and fixed on top using suitable lifting equipment. The hoist or trolley, operator cabin, ladder, walkway, cabling, electrical panel, limit switches and rail clamps are then fitted and connected.
The crane is tested for hoisting, cross travel and long travel on the ground rails with a rated test load. Brakes, overload limiter, buffers and safety devices are checked, and your operators are briefed on safe operation, wind precautions and routine inspection before handover.
A: A Goliath crane is a gantry crane with two legs that run on ground-level rails, so it works outdoors or in open areas without any building structure. An EOT crane runs on runway beams fixed to a building and is used indoors. Choose a Goliath crane when you need to lift loads in a yard, and an EOT crane when you have a covered shed with a runway.
A: Goliath cranes are best used in steel yards, stockyards, scrap yards, precast and casting yards, open fabrication areas, shipyards and loading zones. They suit any open space where heavy material has to be lifted, moved and stacked along a fixed path.
A: Yes, Goliath cranes are designed for outdoor use. Arvex Cranes provides a protective paint finish, a covered electrical panel and rail clamps to hold the crane steady on its rails. Operators should stop work and park the crane with clamps applied during strong wind, as per safe operating practice.
A: A Goliath crane needs a level, well-prepared ground rail bed with a strong foundation and a power supply point along the travel path. Our engineers check your yard layout, rail alignment and foundation condition before finalizing the design, and guide you on any changes needed.
We use cookies to improve your browsing experience, remember your preferences, and understand how visitors use our website. You can choose which cookies to allow. Read our Privacy Policy for more information.