Arvex Cranes manufactures pillar mounted jib cranes with electric chain hoist for machine shops, assembly stations, loading bays and workshops. The rotating arm gives quick, easy lifting around a single work area, without needing an overhead runway or building structure. Load tested before dispatch and supported across India.
The pillar is fixed on a foundation base plate with anchor bolts, so the cantilever arm stays firm and balanced even when the load is at the end of the arm.
A rotation stopper limits the arm swing where needed, so it does not hit walls, machines or people nearby. Smooth slewing bearings help the operator turn the arm gently, and brakes or friction control keep the arm steady while the load is held.
The overload limiter stops lifting beyond the rated load, and limit switches stop the hook at its upper and lower positions. The pendant lets the operator stand clear of the load, and an emergency stop cuts power instantly during any hazard.
Jib cranes lift and position heavy job pieces, chucks, dies and fixtures at CNC machines, lathes, milling and drilling machines, so the operator can load and unload quickly without waiting for a shared overhead crane.
A rotating arm covers the full work circle around one station, helping workers hold, turn and place components during assembly, welding, fitting and finishing.
Used at truck loading docks, warehouse corners, tool rooms and plant maintenance spots for lifting drums, motors, pumps, gearboxes, tools and spare parts over a short, repeated path.
Our engineers check the floor strength, work area, headroom and power supply point. The foundation is prepared as per our drawing, and anchor bolts are set accurately, since the stability of a jib crane depends on its base.
The pillar is placed on the foundation and aligned perfectly upright using a level and plumb check. The jib arm is then mounted on the slewing bearing, and the rotation is checked for smooth, free movement through the full working circle.
The electric hoist and trolley are fitted on the arm, and cabling, pendant control and limit switches are connected. The crane is tested with a rated test load for lifting, trolley travel and rotation. Your operators are then briefed on safe use and daily checks before handover.
A: A jib crane has a vertical pillar with a rotating horizontal arm that carries a hoist. It lifts loads around one work area, without needing a runway or building structure. Choose a jib crane for a single machine, workstation or loading point, and an EOT crane when you need to move loads across a full workshop bay.
A: Jib cranes are commonly made as pillar mounted (fixed on a floor foundation) and wall mounted (fixed on a strong wall or column). Arvex Cranes builds jib cranes to suit your work area, arm length, lifting height and mounting requirement. Our engineers will recommend the right type after checking your site.
A: A pillar mounted jib crane needs a strong, level concrete floor or a dedicated foundation with anchor bolts, as the stability of the crane depends on its base. Arvex Cranes shares a foundation drawing and checks the base before erection, so the crane stays firm and safe in use.
A: The arm rotates around the pillar on slewing bearings, and the rotation range depends on the design and mounting type, so it can be matched to your layout. An electric chain pulley block or electric wire rope hoist can be fitted on the arm trolley, depending on your load and duty. Share your work area details for a suitable recommendation.
We use cookies to improve your browsing experience, remember your preferences, and understand how visitors use our website. You can choose which cookies to allow. Read our Privacy Policy for more information.