A single girder EOT crane in India is the way to lift things in workshops, warehouses and mid-size factories. It moves things easily takes up less space above and is much cheaper, than bigger crane options. This guide shows how it works, where it is used what makes it expensive and how to pick the company that makes it.
What Is a Single Girder EOT Crane?
EOT means Electric Overhead Travelling crane. A single-girder overhead crane has a main beam that stretches across the bay. An electric hoist moves, along the side of this beam. The beam sits on two end carriages that move on rails attached to the building columns or gantry.
The crane can move in three ways: the hoist lifts the trolley moves across the span. The whole bridge moves along the length of the shed. A single operator can control all of this from a pendant or remote.
How Does a Single Girder Overhead Crane Work?
The system has four parts:
Girder: the main beam, usually a box girder or rolled steel joist.
End carriages: wheel assemblies that carry the girder along the runway.
Trolley: an electric wire rope hoist or chain hoist that lifts and traverses.
Control Pendant: the electrics that control speed, direction and safety limits.
Modern cranes use speed drives, for smooth starts and stops. This reduces load swing. Extends component life.
Types of Single Girder EOT Crane in India
Choose the type based on your plant layout and duty.
Top-running crane: the girder rides on top of the runway rails. You may find the running crane best if you need the highest lifting height and the top-running crane is the most common choice.
Under- crane: the girder hangs from the roof structure. The slung crane fits low‑headroom buildings.
Wire rope hoist crane: the wire rope hoist crane works for higher capacity and longer duty cycles.
Chain hoist crane: the chain hoist crane is suitable for loads and compact workshops.
Pendant or remote operated crane: a pendant crane keeps the operator near the load while a radio‑remote crane gives a distance for the operator.
Crane: the HOT crane is a hand‑operated variant, for low‑use areas where electric power is limited.
Explore the full range on our EOT / HOT crane page.
Key Specifications to Know
| Parameter | Typical Range |
|---|---|
| Capacity | 1 to 15 tonnes |
| Span | 3 to 22 metres |
| Duty class | Light to heavy duty (Class II, III) |
| Control | Pendant, remote or cabin |
| Power supply | 415 V, 3 phase, 50 Hz |
Always confirm the exact EOT crane capacity, span, lifting height and duty class with your manufacturer before ordering.
Single Girder vs Double Girder Crane
| Feature | Single Girder | Double Girder |
|---|---|---|
| Capacity | Light to medium | Medium to very heavy |
| Headroom needed | Lower | Higher |
| Building load | Lighter | Heavier |
| Cost | Lower | Higher |
| Installation | Faster | More complex |
If your loads are below roughly 15 tonnes and your duty is moderate, a single girder crane is usually the smarter investment. For heavier or continuous duty, see our double girder EOT crane.
Industries and Applications
A single girder EOT crane in India is widely used across:
- Steel and fabrication units
- Automobile and engineering plants
- Warehouses and logistics yards
- Power plants and substations
- Cement, chemical and pharma facilities
- Packaging and food processing units
- Maintenance bays and assembly lines
Typical jobs include loading machines, moving steel plates, positioning dies, handling pipes and feeding production lines.
Single Girder Crane Price: What Affects the Cost?
There is no fixed single girder crane price, because every crane is built to a specification. These factors decide the final quotation:
- Capacity: higher tonnage needs a stronger girder and hoist.
- Span and lifting height: longer spans use more steel.
- Duty class: heavy-duty cranes use sturdier gearboxes and motors.
- Hoist type: wire rope hoists cost more than chain hoists.
- Control system: VFD drives, radio remote and overload protection add cost.
- Site conditions: hot, dusty or corrosive areas may need special protection.
- Installation and transport: distance and site access matter.
Share your capacity, span, height and shed layout with the manufacturer to get an accurate quote. A well-specified crane saves money over its lifetime.
How to Choose the Right Single Girder Crane
Here is the checklist you should use before you make a purchase:
- Make sure you know the load, including any lifting attachments that will be used.
- Take the measurements of the runway span and the available headroom.
- Determine how hours each day the crane will be, in use.
- Look into the power supply and the strength of the structure.
- Choose between a control or a remote control depending on your safety requirements.
- Request load testing before the crane is sent out.
- Make installation, training and service support are confirmed.
Safety, Standards and Maintenance
Indian cranes are designed to Bureau of Indian Standards norms such as IS 807 (design of cranes), IS 3177 (code of practice for EOT cranes) and IS 3938 (electric wire rope hoists). You can read about standards at the Bureau of Indian Standards. Workplace lifting rules also fall under the Factories Act, and guidance is available from DGFASLI.
Good safety practice includes:
- Overload protection and limit switches
- Emergency stop on the pendant
- Daily visual checks before use
- Regular lubrication of gearboxes and wheels
- Periodic inspection of wire ropes, hooks and brakes
- Trained operators and clear communication with ground staff
An annual health check or AMC keeps downtime low and the crane compliant.
Major Industrial Cities We Serve
Demand for a single girder EOT crane in India is strongest in industrial hubs. Arvex supplies and supports cranes in Ahmedabad, Vadodara, Surat, Rajkot, Bhavnagar, Gandhidham, Mundra, Mumbai, Delhi, Noida, Jaipur, Bhopal, Kolkata and Varanasi. Whether you are in a Gujarat GIDC estate or a North India factory cluster, we handle transport, installation and commissioning.
Why Choose Arvex Cranes
Looking for a trusted single girder EOT crane manufacturer in Ahmedabad? Arvex Cranes designs and builds cranes in-house at our Bakrol, Ahmedabad facility.
- 10+ years of experience in lifting equipment
- 243+ completed projects and 543+ happy customers
- In-house manufacturing of girders, end carriages, crabs, hoists and panels
- Load tested before dispatch for safe, stable performance
- Custom engineering for capacity, span, duty class and plant layout
- Pan-India delivery with installation, operator training and after-sales service
As a single girder EOT crane manufacturer in Ahmedabad, we also supply Goliath cranes, Jib cranes, electric chain pulley blocks, electric wire rope hoists, crabs, end carriages and crane electric panels.
Contact: +91 7048667796 | info@arvexcranes.com
Address: D/90, Phase-2, Swarnim Industrial Park, Bakrol-Dhamatvan Road, Bakrol, Ahmedabad – 382430
Frequently Asked Questions
Q.What is a single girder EOT crane?
- A single girder EOT crane is an electric overhead travelling crane with one main beam. An electric hoist runs along the beam to lift and move loads inside a building. See our single girder EOT crane page for details.
Q.What is the capacity of a single girder EOT crane?
- Most single girder cranes handle about 1 to 15 tonnes, with spans of roughly 3 to 22 metres. The exact figure depends on the design and duty class.
Q.What is the price of a single girder EOT crane in India?
- The price depends on capacity, span, lifting height, hoist type, duty class and control system. A manufacturer quotes after reviewing your specification.
Q.Which is better, single girder or double girder crane?
- A single girder crane is better for light to medium loads, low headroom and lower budgets. A double girder crane suits heavier loads and continuous duty.
Q.Where are single girder EOT cranes used?
- They are used in factories, workshops, warehouses, steel and fabrication units, automobile plants, power stations and maintenance bays.
Q.How often should an EOT crane be inspected?
- Operators should do a visual check daily. A qualified person should carry out a full inspection at least once a year, or as your safety rules require.
Q.Which standards apply to EOT cranes in India?
- Key standards include IS 807, IS 3177 and IS 3938. Always confirm compliance with your manufacturer.
Q.How long does a single girder crane last?
- With proper maintenance and correct duty selection, it can serve reliably for many years.
Q.Can a single girder crane be customised?
- Yes. Capacity, span, lifting height, speed, control type and paint can be tailored to your plant.
Q.How do I find a reliable crane manufacturer near me?
- Check in-house manufacturing, load testing, past projects, installation support and after-sales service. Arvex Cranes meets all of these from Ahmedabad.
Conclusion
A single girder EOT crane in India gives you strong lifting performance at a lower cost, with easy installation and simple maintenance. Match the crane to your load, span and duty, and choose a manufacturer that tests, installs and supports what it sells.
Ready to upgrade your material handling? Call +91 7048667796 or email info@arvexcranes.com for a free quote from Arvex Cranes. Visit the Arvex Cranes to explore the full range.