Home > Insights > What Is an End Carriage? Types, Parts, and Working Explained
Technical Insight

What Is an End Carriage? Types, Parts, and Working Explained

Nov 06, 2026
11 min read
What Is an End Carriage? Types, Parts, and Working Explained

An end carriage is the travelling unit fitted at both ends of a crane girder that carries the entire bridge along the runway rails. Every overhead crane, from a small single girder unit to a large goliath crane, depends on it for smooth, straight and safe movement. If it fails, the whole crane stops. This guide explains how it works, its parts, types, maintenance needs and selection tips, so you can buy with confidence.

What Is an End Carriage in a Crane?

This unit, also called an end truck, is a fabricated box-section frame that holds the wheels, bearings and drive of an overhead crane. Two units are joined to the girder ends and run on rails fixed to the runway beams. This lets the bridge travel the full length of your shop floor.

It performs three important jobs:

  • It carries the dead weight of the girder, hoist and the lifted load.
  • It transfers drive force from the motor to the wheels.
  • It keeps the bridge square on the rails during travel.

Because the entire load passes through it, build quality, wheel hardness and alignment matter greatly.

Main Parts and Components

A well-built unit combines several precisely matched components:

  • Box-section frame: a rigid welded structure that resists twisting under load.
  • Crane travel wheels: forged or cast steel wheels, heat treated for wear resistance, usually with double flanges to guide the crane on the rail.
  • Axles and bearings: support the wheels and allow smooth rolling.
  • Geared motor: a motor and gearbox that drive the wheels at a controlled speed.
  • Buffers: absorb impact at the end of the runway or between two cranes.
  • Rail sweeps and guards: clear debris from the rail and protect workers.

Types of EOT Crane End Carriage

Choosing the right design starts with understanding the common types.

1. Individual drive: each unit has its own geared motor. This is the most popular arrangement today because it is compact, reliable and easy to maintain.

2. Central drive: one motor drives both units through a long transmission shaft. It suits small spans but needs careful alignment of the shaft.

3. Bolted or welded construction: bolted units are easier to transport and install at site, while welded units give maximum rigidity for heavy duty work.

4. By crane type: each EOT crane end carriage differs from the one used in a goliath, semi-goliath or HOT crane, because rail type and duty class differ.

How It Works

The working principle is simple. When the operator presses the travel button on the pendant, the control panel sends power to the geared motor. The gearbox reduces the speed and increases torque, which turns the crane travel wheels along the rail. A variable frequency drive can add soft starting and stopping, so the load does not swing.

Limit switches stop the crane before it reaches the buffers. A reliable crane electrical control panel works together with the drive to deliver this smooth and safe travel.

Key Design Factors to Consider

Before finalising a design, check these points:

  • Capacity and duty class: the unit must handle maximum wheel load with a safety margin.
  • Span and speed: longer spans need stiffer frames and better synchronisation.
  • Rail type and size: wheel profile must match the rail head.
  • Working environment: hot, dusty, humid or outdoor sites need special seals, coatings and lubricants.
  • Skew control: poor wheel alignment causes skewing, which wears flanges and stresses the structure.

International standards such as OSHA 1910.179 outline inspection and safety expectations for overhead cranes, and a general overview is available in this overhead crane reference.

Common Problems and End Carriage Maintenance

Most failures can be prevented with regular care. Watch for these warning signs:

  • Wheel flange wear: shiny, uneven wear on one side points to misalignment.
  • Crane skewing or jerky travel: often caused by uneven wheel diameters or worn bearings.
  • Unusual noise or heat: usually indicates dry bearings or gearbox faults.
  • Loose bolts or cracked welds: a serious risk that needs immediate action.

Good upkeep follows a simple routine:

  1. Lubricate bearings and gearboxes as per the manual.
  2. Measure wheel diameter, gauge and diagonal to confirm alignment.
  3. Inspect welds, bolts and buffers every month.
  4. Test limit switches and brakes before each shift.
  5. Replace worn crane travel wheels in pairs.
  6. Carry out a yearly load test through a competent person.

Planned end carriage maintenance reduces breakdowns, saves spare parts cost and extends rail life.

How to Choose the Right End Carriage

Use this checklist when you request a quotation:

  • Share crane capacity, span, lifting height and duty class.
  • Provide rail size, runway length and building clearances.
  • Mention the work environment and shift pattern.
  • Ask about wheel material, hardness and bearing brand.
  • Confirm whether the unit is load tested before dispatch.
  • Check availability of installation, training and after-sales support.

Matching the unit with the right EOT / HOT crane, goliath crane or electric wire rope hoist gives the best performance and the lowest running cost.

Why Choose Arvex Cranes?

Arvex Cranes is an Ahmedabad-based manufacturer with over 10 years of experience and 243+ completed projects. Every end carriage, girder, trolley, hoist and control panel is designed and built in-house by our engineers. Here is what sets us apart:

  • In-house manufacturing: better control over quality, cost and delivery time.
  • Load tested before dispatch: every unit is checked for safe, stable performance.
  • Pan-India supply: we serve steel, fabrication, automobile, warehouse and power industries across the country.
  • Installation and support: site installation, operator training and responsive after-sales service.

Over 543+ happy customers trust Arvex for dependable lifting solutions. You can explore our single girder EOT crane and double girder EOT crane ranges, or contact our engineering team for a free quote.

Conclusion

The end carriage may look like a simple frame, yet it decides how smoothly, safely and economically your crane runs. Strong construction, quality wheels, correct alignment and regular inspection protect both your crane and your people. If you need a dependable unit built for Indian working conditions, speak to Arvex Cranes today at +91 7048667796 or email info@arvexcranes.com.

Frequently Asked Questions (FAQs)

What is an end carriage in a crane?

  • It is a box-section travelling unit fitted at each end of a crane girder. It houses the wheels, bearings and drive, and moves the crane along the runway rails while supporting the full weight of the bridge and load.

What does an EOT crane end carriage do?

  • It supports the girder, carries the load to the rails and provides long-travel movement. Together with the geared motor and wheels, it keeps the bridge aligned and allows controlled, smooth travel across the bay.

What are the main parts of a crane end truck?

  • The main parts are the box-section frame, travel wheels, axles, bearings, geared motor, buffers and rail sweeps. Each part must be matched to capacity, span and duty class for safe performance.

What causes crane skewing?

  • Skewing is mainly caused by uneven wheel diameters, worn bearings, misaligned rails or unsynchronised drives. It increases flange wear and structural stress, so it should be corrected quickly through alignment checks.

How often should end carriage maintenance be done?

  • Perform a visual check daily, a detailed inspection monthly and a full load test and alignment check at least once a year. Heavy-duty or outdoor cranes may need more frequent inspections.

Can crane travel wheels and drives be customised?

  • Yes. Manufacturers can customise wheel size, drive type, frame design and coatings to suit your crane capacity, span, rail and working environment.

Howdy, Arvex Crane