A double girder EOT crane is the standard choice when your plant must lift heavy loads, run long shifts and stay safe every day. Two parallel girders carry the trolley and hoist. This gives you higher capacity, a wider span and a longer working life than lighter designs. This guide explains how the crane works, what its specifications mean and how to pick the right one. Every section follows what matters most on the shop floor: safety, performance, load capacity and service life.
What Is a Double Girder EOT Crane and How Does It Work?
An Electric Overhead Travelling (EOT) crane runs on rails fixed high on the workshop columns. In a double girder overhead crane, two box girders rest on end carriages at each end. The trolley, also called a crab, runs on rails over both girders and carries the hoist.
Three motions work together. The hoist lifts the load, the trolley moves it across the span and the bridge travels the full length of the bay. The operator controls all three from a pendant, a radio remote or a cabin.
Because the hook sits between the girders, you also gain extra hook height. This design suits tall, busy bays.
Main Components of a Double Girder Overhead Crane
- Main girders: fabricated box sections that carry the trolley and the load.
- End carriages: wheel assemblies with geared motors that drive the bridge.
- Crab (trolley): holds the hoist and moves across the span.
- Electric wire rope hoist: raises and lowers the load smoothly.
- Electric control panel: houses drives, contactors and protection devices.
High Safety: Built-In Protection for Every Lift
A well-built crane protects people, loads and the building. Look for these features:
- An overload limiter that stops the hoist beyond rated load.
- Upper and lower limit switches on the hoist.
- Travel limit switches and buffers on the bridge and trolley.
- Emergency stop and phase protection in the panel.
- Walkways, handrails and toe guards along the girders.
Reputable makers design EOT cranes to Indian Standard IS 3177. The OSHA overhead crane rule (1910.179) also offers a useful inspection checklist.
Superior Performance: Smooth and Precise Motion
Variable frequency drives give soft starts and stops, so the load does not swing. Slow creep speeds help you place heavy parts accurately, while higher speeds save time on long runs. Low-headroom designs also let you use more of the building height.
The result is faster cycles, less wear on the structure and less downtime.
High Load Capacity: EOT Crane Specifications Explained
Double girder cranes commonly lift 5 to 50 tonnes, and higher capacities can be engineered. Understand these EOT crane specifications before you request a quote:
| Parameter | Typical range | Why it matters |
|---|---|---|
| Lifting capacity | 5–50 t, higher on request | Maximum safe working load |
| Span | About 10.5–31.5 m, customisable | Distance between runway rails |
| Lifting height | About 6–24 m, customisable | Hook travel from the floor |
| Duty class | A4–A5 common, heavier for steel plants | How often and how hard you lift |
| Power supply | 3-phase, 50 Hz | Must match your plant supply |
| Control | Pendant, radio remote or cabin | Operator safety and comfort |
Share your load, span, lifting height, duty class and supply voltage. The EOT crane specifications can then be finalised quickly.
Long Service Life: Built to Run Year After Year
A crane earns its price over decades. Service life depends on steel quality, welding, duty class and maintenance. Choose quality plate, sound welds and machined wheels. Then follow a simple routine:
- Daily: check the pendant, brakes, hook latch and wire rope.
- Monthly: lubricate moving parts and inspect limit switches and rails.
- Yearly: carry out a load test and structural inspection by a competent person.
Single Girder vs Double Girder Crane: Which One Fits?
A single girder EOT crane uses one girder and an underslung hoist. It costs less and suits light to medium duty. A double girder crane handles heavier loads and longer spans.
| Feature | Single girder EOT crane | Double girder crane |
|---|---|---|
| Capacity | Light to medium, up to about 20 t | Medium to very heavy |
| Span | Shorter | Longer |
| Hook height | Lower | Higher |
| Duty | Occasional to moderate | Moderate to continuous |
| Initial cost | Lower | Higher |
Industrial Applications of Double Girder Overhead Cranes
- Steel plants, foundries and forging shops
- Fabrication and machine shops
- Automobile and engineering plants
- Power plants and turbine halls
- Heavy warehouses and storage yards
How to Choose the Right Double Girder EOT Crane
- Define the maximum load and add a safety margin.
- Measure the span and the hook height you need.
- Select the duty class from shifts and lifts per hour.
- Confirm supply voltage and control type.
- Compare design quality, load testing and after-sales support, not only price.
If your loads stay light, a single girder EOT crane may save money. If you expect growth, a double girder EOT crane is the safer long-term investment.
Why Choose Arvex Cranes?
As an EOT crane manufacturer in Ahmedabad, Arvex Cranes brings 10+ years of experience and 243+ completed projects. We serve steel, fabrication, automobile, warehouse and power industries across India.
- In-house manufacturing: girders, end carriages, crabs, hoists and panels are designed and built by our engineers.
- Load tested before dispatch: every crane is checked for safe, stable lifting.
- Pan-India delivery: secure packing and dispatch to all major industrial cities.
- Installation and support: commissioning, operator training and after-sales service.
Visit us: D/90, Phase-2, Swarnim Industrial Park, Bakrol, Ahmedabad – 382430.
Also explore our EOT / HOT cranes, Goliath cranes and Jib cranes.
Frequently Asked Questions
1. What is a double girder EOT crane?
A double girder EOT crane is an electric overhead travelling crane with two parallel girders carrying a top-running trolley and hoist. It lifts heavier loads over wider spans than a single girder design. It suits heavy-duty, high-frequency work in industrial plants.
2. What capacity can a double girder overhead crane lift?
Standard double girder overhead cranes typically lift 5 to 50 tonnes, and higher capacities can be engineered. Spans of roughly 10 to 32 metres are common. Span and lifting height are customised to your building.
3. How is a single girder EOT crane different?
A single girder EOT crane has one girder and an underslung hoist, so it is lighter and cheaper for light-to-medium duty. A double girder crane handles higher loads and longer spans and gives more hook height.
4. Which EOT crane specifications should I share for a quote?
Share capacity, span, lifting height, duty class, runway length, power supply, control type and working environment. These EOT crane specifications let the manufacturer design the right girders, hoist and panel.
5. Who is a trusted EOT crane manufacturer in Ahmedabad?
Arvex Cranes, based in Bakrol, Ahmedabad, designs, builds and load tests cranes in-house and delivers across India. Call +91 7048667796 or email info@arvexcranes.com.
Conclusion
A double girder EOT crane gives your plant high safety, superior performance, high load capacity and long service life in one machine. Match capacity, span, lifting height and duty class to your work, then choose a partner that tests every crane before dispatch. As an EOT crane manufacturer in Ahmedabad serving all of India, Arvex Cranes will help you size, build and install the right crane. Call +91 7048667796, email info@arvexcranes.com or request a free quote today.