12-TON GOLIATH CRANE

Goliath Crane for a Steel Processing Yard in Mundra

How a steel processing yard in Mundra replaced slow forklift and mobile crane loading with a custom Goliath crane, installed by Arvex Cranes in 28 days, and loaded trucks 52% faster.

Client: Steel Processing & Storage Yard
Location: Mundra, Kutch, Gujarat
Timeline: 28 Days (Design to Commissioning)
Goliath Crane for a Steel Processing Yard in Mundra

📊 Key Operational Impact

12 Ton
Rated Lifting Capacity
52%
Faster Truck Loading
18 m
Open-Yard Span Covered
8 Months
Without Major Breakdown

🛠️ Project Narrative & Machinery Specs

Open yards are hard on lifting equipment. Wind, mud, salty air and constant truck traffic slow everything down. A steel processing yard in Mundra faced all of these. Arvex Cranes designed and built a Goliath crane for the yard and commissioned it in 28 days. Here is how the project worked.


Project at a glance

  • Client type: Steel processing and storage yard
  • Location: Mundra, Kutch
  • Equipment: 12-Ton Single Girder Goliath Crane, 18 m span
  • Control: Wireless remote
  • Timeline: 28 days

Why a Goliath crane?

An EOT crane needs a covered building with a runway on the structure. This client had an open yard with no building. A Goliath crane runs on its own legs and ground rails, so it can cover the whole yard without any new structure. That made it the practical choice.


How we delivered it?

  1. Site survey (Days 1-3): We measured the yard, marked the rail line and checked the soil for the foundation.
  2. Design and approval (Days 4-8): We shared drawings, covering span, height, coating and control. The client approved them.
  3. In-house manufacturing (Days 9-21): We built the girder, legs and end carriages at our facility, with coating suited to coastal air.
  4. Testing and dispatch (Days 22-23): The crane passed a proof load test before leaving our works.
  5. Installation and commissioning (Days 24-28): Our team installed the crane, aligned the rails, tested all motions and trained the operators.

Client testimonial

“Trucks used to wait half a day for loading. Now the crane loads them quickly, and we no longer hire a mobile crane. The Arvex team understood our yard conditions very well.” — Yard Manager, Steel Processing Unit, Mundra


Key takeaways

  • A Goliath crane suits open yards where no building supports a runway.
  • Coating and panel protection matter in coastal, humid locations.
  • A permanent crane removes the recurring cost of hiring mobile cranes.

FAQs

1. When should I choose a Goliath crane instead of an EOT crane?

  • Choose a Goliath crane for open yards and outdoor areas where an overhead runway structure is unavailable. It operates on its own supporting legs and ground rails, while an EOT crane is typically used inside industrial buildings.

2. Can a Goliath crane work in rain and coastal weather?

  • Yes, a Goliath crane can operate in rainy and coastal environments when equipped with suitable protective coatings, weather-resistant electrical enclosures and proper rail maintenance.

3. How long does it take to install a Goliath crane?

  • In the referenced project, installation took 28 days from site survey to commissioning. The actual timeline depends on lifting capacity, span, site readiness and rail foundation conditions.

4. Does Arvex Cranes build Goliath cranes to custom sizes?

  • Yes, Arvex Cranes offers customized Goliath crane solutions based on lifting capacity, span, lifting height and duty class to meet specific industrial requirements.

Running an open yard or outdoor storage area? Share your load, span and location with our team and get a custom Goliath crane quote with drawings. Call +91 7048667796 or send a WhatsApp inquiry.

⚡ The Material Handling Challenge

The yard stored steel plates, pipes and coils in the open and loaded them onto trucks with forklifts and a hired mobile crane. Trucks queued for hours during peak dispatch. Uneven ground and monsoon mud made every lift slower and riskier, and the hired crane added cost on every shift. The owner wanted one permanent lifting system that could cover the full yard, work outdoors in coastal weather, and keep dispatch moving.

Machinery Specifications

Client / Partner
Steel Processing & Storage Yard
Equipment Type
Steel Trading & Port-Linked Logistics
Installation Location
Mundra, Kutch, Gujarat
Commissioning Time
28 Days (Design to Commissioning)
Technical Build
Custom 12-Ton Single Girder Goliath Crane with Wireless Remote Control
🚀 Request Free Machinery Quote 💬 Chat on WhatsApp