10-TON EOT CRANE RETROFIT

EOT Crane Retrofit and Upgrade for a Chemical Plant in Vapi

A Vapi chemical plant was losing production hours to an ageing crane that kept breaking down. Instead of replacing it, Arvex Cranes upgraded the control system in 9 days, and breakdown calls fell by 70%.

Client: Chemical & Dyes Manufacturing Plant
Location: GIDC Vapi, Valsad, Gujarat
Timeline: 9 Days (Retrofit with Minimal Shutdown)
EOT Crane Retrofit and Upgrade for a Chemical Plant in Vapi

📊 Key Operational Impact

9 Days
Retrofit with Minimal Shutdown
70%
Fewer Breakdown Calls
VFD
Smooth Soft-Start Control
100%
Lifts Covered by Overload Protection

🛠️ Project Narrative & Machinery Specs

A crane does not always need replacing. Many times, the structure is healthy and only the controls have worn out. A chemical plant in Vapi faced this situation with its 18-year-old EOT crane. We checked the structure, replaced the weak parts and returned the crane in 9 days. This case study shows what we changed and why.


Quick facts

  • Client type: Chemical and dyes manufacturer
  • City: Vapi, Valsad
  • Work done: Control retrofit on an existing 10-Ton EOT crane
  • Upgrades: VFD panel, radio remote, overload limiter, new wiring
  • Shutdown: 9 days

Why we recommended a retrofit?

We first checked the girder, wheels, end carriages and rails. All were within safe limits. The real problem was the control system. A new crane would have cost far more and taken weeks to install. A retrofit solved the actual problem at a fraction of the cost and kept downtime short.


What we did, in order

  1. Inspection (Days 1-2): We checked every structural and mechanical part and wrote a short condition report.
  2. Planning (Day 3): We agreed on parts, panel design and a shutdown window with the client.
  3. Panel and parts preparation (offsite): We built the VFD panel in our workshop while the old crane kept working.
  4. Replacement (Days 4-7): We removed the old panel and wiring and installed the new system.
  5. Testing and handover (Days 8-9): We tested every motion, checked the limiter and carried out a load test. Then we trained the operators.

What we learned from this project?

  • Check the structure before deciding to replace a crane.
  • Building the new panel offsite shortens the shutdown.
  • In corrosive shops, a sealed enclosure matters as much as the drive.

Frequently Asked Questions (FAQs)

1. Can an old EOT crane be upgraded instead of replaced?

  • Yes. If the girder, end carriages, wheels, and rails are structurally sound, an old EOT crane can be upgraded. Replacing the control panel, wiring, and safety devices can cost much less than purchasing a new crane.

2. What are the benefits of adding a VFD to a crane?

  • A VFD provides smooth starts and stops, reduces load swing, and minimizes stress on motors, brakes, and gearboxes. It also offers better speed control for precise lifting operations.

3. How long does an EOT crane retrofit take?

  • In this project, the retrofit was completed in just 9 days, including inspection, panel replacement, testing, and operator training. The duration depends on crane size, wiring condition, and required components.

4. Does a retrofit include overload protection?

  • Yes. Arvex Cranes can install overload limiters, limit switches, and radio remote controls during the retrofit to improve crane safety and meet modern operational requirements.

Client feedback

“We expected to buy a new crane. Arvex checked it properly and showed us that only the controls needed work. The crane is smoother than it has been in years.” — Maintenance Head, Chemical Plant, Vapi


Is your old crane giving trouble? Send us its capacity, age and the problems you face. Our engineers will inspect it and tell you honestly whether it needs a retrofit or a replacement. Call +91 7048667796 or message us on WhatsApp.

⚡ The Material Handling Challenge

The plant’s 10-ton EOT crane was nearly 18 years old. The mechanical structure was still sound, but its old contactor panel gave jerky starts and stops, which swung loads of drums and reactor parts. Contacts burned out often, and the crane had no overload protection. Chemical fumes in the shop made things worse, as the old panel corroded faster than expected. The management first thought of buying a new crane, but the cost and the long shutdown made that a hard decision.

Machinery Specifications

Client / Partner
Chemical & Dyes Manufacturing Plant
Equipment Type
Specialty Chemicals & Dyes
Installation Location
GIDC Vapi, Valsad, Gujarat
Commissioning Time
9 Days (Retrofit with Minimal Shutdown)
Technical Build
VFD Control Panel, Radio Remote Control and Overload Limiter on the Existing 10-Ton EOT Crane
🚀 Request Free Machinery Quote 💬 Chat on WhatsApp