Arvex Cranes manufactures crab winch trolleys for double girder EOT cranes and gantry cranes. Built on a rigid steel frame with a grooved wire rope drum, geared motor, electromagnetic brake and four wheels, the crab gives strong, stable hoisting and smooth cross travel for heavy-duty plants. Load tested before dispatch and supported across India.
An electromagnetic brake holds the load the moment the winch stops or power is cut, so the load does not drop. An overload limiter stops lifting beyond the rated load, which protects the wire rope, gearbox, motor and the crane girder.
Grooved drum and rope guide keep the wire rope winding neatly in layers, and a hoist limit switch stops the hook before it is over-wound. A cover over the rotating drum and gearbox keeps hands and clothing away from moving parts.
A geared motor with brake gives smooth, controlled cross travel along the girder, and buffers or stoppers at the girder ends prevent run-off. Pendant or remote control keeps the operator at a safe distance, and an emergency stop cuts power instantly during any hazard.
Crab winch trolleys on double girder cranes lift and place heavy plates, beams, coils, girders and large fabricated structures, with strong hoisting and stable cross travel for long, demanding shifts.
Used on plant cranes for turbine, generator, pump, motor and gearbox maintenance, and for repeated heavy material handling across wide plant bays where a compact hoist is not enough.
Fitted on gantry (Goliath) cranes to lift precast slabs, beams, pipes, heavy machinery and large sections in yards, loading zones and open work areas, with a long rope drum for greater lifting height.
Our engineers check the crane girder rails for straightness, level and rail gauge, and confirm that the girder, end carriages and power supply can safely carry the crab and the rated load before fitting begins.
The crab is lifted onto the girder rails and its four wheels are aligned for smooth cross travel. The wire rope is reeved through the hook block and anchored on the grooved drum, so it winds neatly in the grooves, and travel stoppers are fixed at both ends of the girder.
The hoisting motor, cross travel motor, brakes, limit switches and pendant or remote control are connected, and the phase direction is checked. The crab is then run without load, tested with a rated test load, and your operators are briefed on safe use and daily rope checks before handover.
A crab is an open winch unit with a frame, grooved rope drum, motor, gearbox, brake and four wheels. It runs across the girders of a double girder EOT crane or gantry crane and lifts the load with a wire rope. It is used in steel plants, heavy fabrication units, power plants and yards.
A wire rope hoist is a compact, ready-made unit that suits standard duty and monorail or crane fitting. A crab is an open winch built on a frame for heavier loads, longer lifting heights and demanding duty, and it can be designed around your girder gauge and drum length. Our engineers can recommend the right one for your application.
A crab is mainly fitted on double girder EOT cranes and gantry (Goliath) cranes, where it runs on rails fixed over the girders. It can also be supplied for new cranes or as a replacement for an existing crane, matched to your rail gauge and load.
Share the rail gauge, lifting height, lifting speed, duty class, power supply and the type of crane it will run on. For a replacement, a photo and the details of the old crab also help. Our team checks the information and prepares a suitable design and quotation.
We use cookies to improve your browsing experience, remember your preferences, and understand how visitors use our website. You can choose which cookies to allow. Read our Privacy Policy for more information.