Outdoor Gantry Design | Yard Lifting | Load Tested

Goliath Crane

Arvex Cranes manufactures Goliath cranes (gantry cranes) for steel yards, fabrication areas, stockyards and open work sites. Two sturdy legs run on ground rails, so you can lift and move heavy loads outdoors without needing a building structure. Load tested before dispatch and supported across India.

 

Goliath Crane
Technical Specifications

Technical Specifications

Gantry Structure
Fabricated box girder bridge supported on two rigid legs, built for open yard and outdoor lifting
Travel on Ground Rails
Motorized long travel on ground-level rails with heavy-duty wheels and end trucks
Hoisting Unit
Electric wire rope hoist or open winch trolley travelling across the girder
Operator Control
Operator cabin, wireless remote or pendant control, as per your duty and yard layout
Weather Protection
Protective paint finish and covered electrical panel with rail clamps for outdoor conditions
Customization
Made to your yard width, rail length, lifting height, duty class and cantilever requirement

Product Video Gallery

Goliath Crane

Goliath Crane

Goliath Crane

Goliath Crane Safety Features

Rail Clamps & Wind Protection:

Rail clamps or anchoring devices hold the crane firmly on its ground rails when it is parked or when strong wind blows, so the gantry stays stable in open yards and outdoor conditions.

Travel Stoppers, Buffers & Warning Alarm:

Stoppers and buffers at the ends of the ground rails prevent the crane from running off track. A hooter or warning light alerts workers and vehicles in the yard while the crane is moving.

Safe Operator Cabin, Overload Protection & Emergency Stop:

A cabin or remote control gives the operator a clear view of the load and yard. An overload limiter stops lifting beyond the rated load, limit switches control the hook position, and an emergency stop cuts power instantly during any hazard.

Goliath Crane Industrial Applications

Steel Yards, Stockyards & Scrap Yards:

Goliath cranes load, unload and stack steel plates, pipes, coils, structural sections and scrap in open yards, moving along ground rails across the full storage area.

Precast, Construction & Infrastructure Sites:

Used to lift and place precast slabs, beams, girders, shuttering and heavy construction material at casting yards, bridge and metro project sites, and open work areas.

Open Fabrication Bays, Shipyards & Loading Areas:

Handles large fabricated structures, machinery and containers in outdoor fabrication areas, ports, shipyards, rail sidings and truck loading zones where overhead building rails are not available.

Goliath Crane Installation & Erection

Yard Survey, Rail Foundation & Alignment:

Our engineers check your yard layout, soil and foundation condition, ground rail level, rail gauge and power supply point. The rail bed is prepared and aligned accurately, since the crane’s smooth and safe travel depends on it.

Leg, Girder & Trolley Erection:

The two legs are positioned on the ground rails and the girder is lifted and fixed on top using suitable lifting equipment. The hoist or trolley, operator cabin, ladder, walkway, cabling, electrical panel, limit switches and rail clamps are then fitted and connected.

Load Test, Travel Check & Operator Briefing:

The crane is tested for hoisting, cross travel and long travel on the ground rails with a rated test load. Brakes, overload limiter, buffers and safety devices are checked, and your operators are briefed on safe operation, wind precautions and routine inspection before handover.

Goliath Crane FAQs

Q: What is a Goliath crane and how is it different from an EOT crane?

+

A: A Goliath crane is a gantry crane with two legs that run on ground-level rails, so it works outdoors or in open areas without any building structure. An EOT crane runs on runway beams fixed to a building and is used indoors. Choose a Goliath crane when you need to lift loads in a yard, and an EOT crane when you have a covered shed with a runway.

Q: Where is a Goliath crane best used?

+

A: Goliath cranes are best used in steel yards, stockyards, scrap yards, precast and casting yards, open fabrication areas, shipyards and loading zones. They suit any open space where heavy material has to be lifted, moved and stacked along a fixed path.

Q: Can a Goliath crane work outdoors in wind and rain?

+

A: Yes, Goliath cranes are designed for outdoor use. Arvex Cranes provides a protective paint finish, a covered electrical panel and rail clamps to hold the crane steady on its rails. Operators should stop work and park the crane with clamps applied during strong wind, as per safe operating practice.

Q: What preparation does my yard need before a Goliath crane is installed?

+

A: A Goliath crane needs a level, well-prepared ground rail bed with a strong foundation and a power supply point along the travel path. Our engineers check your yard layout, rail alignment and foundation condition before finalizing the design, and guide you on any changes needed.

Load Tested Before Dispatch
In-House Design & Build
Pan-India Supply
Warranty & After-Sales Support